Breatheflex Pro Chainsaw Trousers

A pair of specialist trousers designed to protect the wearer from chain saw injury during tree work. The Breatheflex Pro trousers make use of high tenacity polymer to ensure good protection with flexibility to manoeuvre around the job site and tree canopy. The trousers feature a resilient and abrasion resistant panel on the front and ankles. The material is woven with Kevlar fibres which make it extremely tough when getting bashed and scraped on trees. These fibres will also protect the body from chainsaw damage by being drawn into the drive sprocket of the saw, which blocks the chain movement. The fibres are resistant to cutting and absorb rotational energy reducing the chainsaw speed. The crotch is made with Kevlar to eliminate ripping and a stretchy fabric that allows good movement and flexibility in the tree. These trousers feature an adjustable waistband, kidney pad on the back for braces, elasticated hooks at the base of the trousers to attach to laces of boots, and zipped pockets with taped seams. These are design C trousers with protection to the front and back of the legs only and the protection is rated to Class 1.

printed: "Model Number: AT4070. Weight: 1520g* Notified body no. 0598. BREATHEfleX(R) Pro FABRIC TECHNOLOGY. 6D-Technology(TM) Unrivalled comfort and performance enhancing wearer safety and energy efficiency. Climasphere(TM) - Moisture wicking and breathable for comfort and performance. Trio-Strand Gridlock LITE(TM) - Multi-layered chainsaw shield system for ultimate protection. *Weight based on size M/REG" (label)

printed: "Main Shell Fabric: 87% PA / 13% Elastane. Stretch fabric in Crotch: 70% PA / 18% Aramid / 12% Elastane. Greave Protection Area: 75% Polyamide / 8% PU / 17% Aramid. Cut Protection Insert: 42% PET / 36% PE / 22% PP. Lining: 100% PA. Pocket Lining: 50% PES / 50% Cotton. Do not tumble dry. Reshape when wet." (label)

printed: "ARBORTEC. 72-80. 78-82 [washing instructions] Waist Size: SMALL 28-32inch. Inside Leg: REG 31inch. Oldmedow Road. Kings Lynn UK. PE30 4JJ. +44 (0) 1553 768346 www.arbortec.com" (label)

printed: "UK CA 0359" (label)

printed: "CE EN381-5:1995 DESIGN C CLASS 1. Design C trousers are for use in higher risk situations, such as aerial chainsaw work or by users with lower experience levels. Class 1: 20m/s. Testing according to this standard can be made with the chain speeds and designated classes as shown below: Class 1: 20m/s. Class 2: 24m/s. Class 3: 28m/s" (label)

printed: "GB important - please note: This product is not a substitute for the sale use of a chainsaw and does not provide total protection. Read carefully all the safety instructions applicable to your chain saw. Make sure that the garments saw protection overlaps the saw protection of your footwear. - The trouser should be discarded and not used again it the leg protection has been: - Damaged - Incorrectly washed - Altered from its original shape. In the above cases its protective qualities may be reduced. - Damaged outer material must be repaired immediately to prevent the leg protection becoming damaged. When the repair is carried out to the outer material. do not sew into the leg protection, or use adhesives for repairs, as it may affect the leg protection and reduce its protective qualities. Wash the trousers regularity: heavily soiled trousers may provide less protection. Use maximum 40 degrees water temperature and normal wash cycles. After washing. stretch the trousers to their original form and spread on a level surface dry. Do not bleach or iron. Do not dry clean or remove stains with solvents. Do not tumble dry. This product is not a substitute for the safe use of a chainsaw and does not provide total protection. Read carefully all the safety instructions applicable to your chain saw. Make sure that the garments saw protection overlaps the saw protection of your footwear. - This product conforms to the basic demands in the PPE Regulation (EU) 2016/425 and is manufactured in accordance with EN 150 13688-2013, EN 381- 5:1 995 -Product is certified by SGS Fimko Lid (Notified Body 0598) Takomotie 8. F-00380 Helsinki, Finland." (label)

AIBDC : 009650